Refuse Tarp Systems

Refuse Tarping System

Telescoping Low-Arms, Adjustable Gantry w/ROLLMASTER Roller Assembly, Strong-Arms (3/16 A5 steel), External cylinders, Three-year warranty.
Standard Tarp: Heavy duty mesh

Refuse Tarping System RP4500SARG View Details

Galfab Hooker

The Hooker

A securement system that works on containers using 2″ x 6″ tubing long sills with the area above and outside open and free.

Cross member locations will not interfere with the hold capability of THE HOOKER provided they are 3″ or more in height.

THE HOOKER system is designed to be used with container in transport (lowered not raised) position only.

Each Kit Includes

(2) sets of hold on arms, left and right
(1) 4 way air control valve with mounting plate
(2) quick release air valves
Airline with fittings
Installation Instructions
Installation

6 hours average installation.
Some hoists could require relocating side rollers, etc.
The cavity above the container long sill and between the cross member must be open to allow the hold on arms to engage.
Damaged long sills or caved in floors may need repaired to allow room for “The Hooker”

IMG_0298-300x225 View Details

Galfab Rock N Dumper

Rock N Dumper

The Galfab Rock ‘N Dumper utilizes a shaft that rides through a “V” shaped rocker guide. This feature allows the body to always ride on the base. Some competitors use the pin and hole method that can easily jump track and detach itself from the base.

The Galfab Rock ‘N Dumper latch handle is designed to easily be switched from the right or left side of the hopper.

- Replace drums and barrels with easy unloading hoppers
- Great for storing materials
- Stackable thru 2 1/2 Cu.Yds.
- Excellent for in-plant housekeeping
- Rights itself and locks into loading position after dumping
- Improves employee material handling efficiency
- Reduces employee insurance claims and down time injuries
- End individual handling of sharp or heavy pieces
- Add a simple remote latch pull and fork truck drivers stay on the truck

Standard Features

Prime Paint
One-way Fork Pockets
Chain for Retaining Hopper to Forklift
Options

Available in Heavy Gauge (7 Ga.) or Light Gauge (12 Ga.)
Casters- 4”, 6”, 8” in Steel or Rubber Locks
Crane Pick-up Hooks
3-way Entry
Steel Lids, 3 Types
Remote Latch Pull
Choice of Standard GalFab Colors
Platform Legs

Special Features

Dumper Body Stays Aligned on Base, Will Not Jump Pin Holes
Forks are Totally Enclosed on All Dumpers
Body & Base Will Not Separate
Dumpers Stackable Through 2 ½ Cubic Yards
Double Lock Latch on Tripping Handle

rockndumper-300x225 View Details

Galfab Outside Rail Hoist

Outside Rail Hoist

The Outside Rail roll-off hoist is the most common used hoist in the industry today. Galfab offer this hoist with a 8” mainframe and 2” sub frame or the very popular 10” sub frameless hoist.

- Most popular cable roll-off hoist in the market
- Heavy duty ½” thick mainframe
- Inside controls standard reducing the chance of driver injury
- 48 degree dump angle on all models
- Durable rear hinge designed to withstand the stress of grueling day after day use
- 2 minute loading cycle time* keeping your drivers on the road
- Available in 60k and 75k pound models to fit any application.

Standard Features

8 x 4 x 1/2” Tube Main Frame
3 x 2 x 1/4” Tube Sub Frame
2 1/2” diameter Rear Hinge
All Working Points Greasable
1” Spring Loaded Container Stop
2 1/2” diameter Lift Shaft
10” diameter Cable Sheaves
52 gallon Oil Reservoir
Suction Screen and Return Filter
Inside and Outside Controls
Sealed Lighting System

Options

Behind Cab and Oversize Oil Tanks
Tool Boxes
Auxiliary Stops
Poly or Steel Fenders
Tarping Systems
Hooker Hold On Systems
Ratchet Tie Down Straps
Pintle Hook
Front Mount Pump
PTO
Drop Shaft

or-main-300x243 View Details

Galfab Single Axle Hook Hoist

Single Axle Hook Hoist

- Driver can load and unload from cab, reducing the chance of injury
- Short wheel base enables it to fit in tight areas
- No cable to hook or unhook means less time spent per pull and more potential pulls per day
- Able to load containers that are not aligned perfectly with the hoist
- Up to a 60 degree dump angle

Standard Features

Outside Reservoir
Outside Controls
Hydraulic Pump
Hoist Up and Back Up Alarms
Sealed Lighting System
All working Points Greaseable

Options

Behind Cab Tank
Front Mount Pump
PTO
Tool Boxes
Poly or Steel Fenders
Inside Controls
Pintle Hook

4-27-12-004-300x225 View Details

Galfab Extendible Tail Roll Off Hoist

Extendable Tail Hoist

The Extendible Tail roll-off hoist has a sliding tail that allows for low loading height for limited overhead clearance and the ability to pick up the container below ground level. This hoist also available with the 8” mainframe and 2” sub frame and the 10” sub frameless hoist.

Provides operators the option of loading in areas with low overhead clearance
Inside controls standard reducing the chance of driver injury
Durable rear hinge designed to withstand the stress of grueling day after day use

Standard Features

8 x 4 x 1/2” Tube Main Frame
3 x 2 x 1/4” Tube Sub Frame
2 1/2” Diameter Rear Hinge
All Working Points Greasable
1” Spring Loaded Container Locks
2 1/2” Diameter Lift Cylinder Shafts
10” Diameter Cable Sheaves
52 Gallon Oil Reservoir
Suction Screen and Return Filter
Inside and Outside Controls
Sealed Lighting System

Options

Behind Cab and Oversize Oil Tanks
Tool Boxes
Auxiliary Stops
Poly or Steel Fenders
Tarping Systems
Hooker Hold On Systems
Ratchet Tie Down Straps
Pintle Hook
Front Mount Pump
PTO
Drop Shaft

11-23-11-003-300x225 View Details

Galfab Inside/Outside Rail Roll Off Hoist

Inside/Outside Rail Hoist

The Inside/Outside Rail roll-off hoist has the ability to pick up outside rail containers as well as “Dempster Dino” containers. This hoist has a Cor-Ten divider rail and inside rollers for the inside rail containers. This hoist is also offered with a 8” mainframe and 2” sub frame and the 10” sub frameless hoist

The most versatile hoist in the market.
Combines Outside Rail and Dempster Dino pickups in one hoist package.
Heavy duty ½” thick mainframe.
Inside controls standard reducing the chance of driver injury.
48 degree dump angle on all models.
Durable rear hinge designed to withstand the stress of grueling day after day use.
2 minute loading cycle time* keeping your drivers on the road.
Available in 60k and 75k pound models to fit any application.

Standard Features

8 x 4 x 1/2” Tube Main Frame
3 x 2 x 1/4” Tube Sub Frame
2 1/2” Diameter Rear Hinge
All Working Points Greasable
1” Spring Loaded Container Locks
2 1/2” Diameter Lift Cylinder Shafts
10” Diameter Cable Sheaves
52 Gallon Oil Reservoir
Suction Screen and Return Filter
Inside and Outside Controls
Sealed Lighting System

Options

Behind Cab and Oversize Oil Tanks
Tool Boxes
Auxiliary Stops
Poly or Steel Fenders
Tarping Systems
Hooker Hold On Systems
Ratchet Tie Down Straps
Pintle Hook
Front Mount Pump
PTO
Drop Shaft

3-8-10-003-300x225 View Details